| Burn the ISO of wifiway and change the boot in the bios |
|
|
|
Author: LSmaz For Live Cd mode First of all check md5 iso file to ensure that we have downloaded the correct file (the original). What role has the md5? Well, practically making it a sum of bytes that has the file and the slightest change in any byte md5 the changes and we will sing to verify that it is not the original. To check the md5 I leave with you a link where hwagm also explains how to test them and where to download applications. (http://foro.seguridadwireless.net/index.php/topic,1069.0.html) Wifiway Download In the following link find download links along with their corresponding md5. The process of burn a cd Checked the image file we will burn in cd We'll start recording the image (ISO) in wifiway cd, we open the UltraIso and we are going directly to the record tab.  We will burn the panel in which we must sting on the button image files.  Once this is done, we look in the directory where we have saved the image file (ISO), the mark and we open for loading.  When you are charged image recording and we hope to burn the CD and ready and we live cd ready for use.  How to enter on the bios Resetting or turn on your computer in the bottom of the screen appears to be the keys to press to enter the bios, I would say something like "press" for the keys enter setup, the most common are pressing F2, F8, F10 , Or the Delete key, but as each pc varies because we look at what was said at first. How to change the boot of the bios Once inside the bios must enter through the key intro on the line for, it also varies according to the bios, depending on whether they are more ancient or more modern, normal would be: Bios Advanced Features, Advanced Setup or more on new Boot tab. Once inside will appear in the order that pulled the units would be basically by default this: 1. First Boot Device: HDD-0 (hard disk, primary-master) 2. Second Boot Device: FLOPY (corresponds to the drive) 3. Third Boot Device: CD-ROM (CD, this course) That there will therefore change the order to boot from the CD, leaving as follows: 1. First Boot Device: CD-ROM (CD, this course) 2. Second Boot Device: HDD-0 (hard disk, primary-master) 3. Third Boot Device: FLOPY (corresponds to the drive) To do this also varies in each bios are usually more common or it would be with the keys + and - OR F5 and F6, situated on the line that we want to raise or lower position. Once this is done to save your changes and exit the bios Press F10 to accept "YES" and will restart again booting and first since the unit assigned, since the CD-ROM. |
| < Prev | Next > |
|---|